Flame Retardant 2-layer Bib ´n´ Brace

SKU
517488
- New, Cantex ARC 25+
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 E3 F1
  • EN 61482-2
    APC 2
    ELIM: 27,0 cal/cm²
  • EN 1149-5
  • EN ISO 11611
    CL.2 A1+A2
  • EN 13034
    type PB[6]
  • EN ISO 20471
    CL.1
  • EN ISO 15797
    50 WASHES

PFAS-free and Inherent Flame Retardant Hi-Vis bib ´n´ brace with a thin lining to achieve high protection against Electric Arc. The bib ´n´ brace also has a high protection against welding and grinding splashes.

The front is made in Cantex Weld fabric, which provides additional high protection against welding and grinding splashes. The back in Cantex Stretch, provides the garment with flexibility and gives you freedom of movement with high levels of comfort. Adjustable braces with concealed plastic buckles. Elastic in back. Front zip. Chest pockets, one with flap. Concealed knife buttons. Inside pocket. Adjustable width and loops in waist. Side pockets. Cargo pocket with flap, mobile phone pocket, pencil loop and concealed D-ring. Ruler pocket with flap and reinforced bottom. Kneepad pockets with two different placement levels. Hip pockets with flap. Contrast stitching. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time.

Size
30"- 50"R, 32"- 40"T, 34"- 48"S

Product information

Quality

885: Cantex Weld - 50% modacrylic / 36% cotton / 12% polyamide / 2% antistatic, 365 g/m²
Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (885+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm²
LOI 29,0%
EN 1149-3
EN 13034 (only for acid and alcaline)
E
884: Cantex Stretch - 48% modacrylic / 35% cotton / 12% polyamide / 3% elastic fibre / 2% antistatic, 365 g/m²
Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (884+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 12 cal/cm², ATPV: 18 cal/cm²
LOI 29,5%
EN 1149-3
EN 13034 (only for acid and alcaline)
911: Tera TX Light - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m²
Shirt quality in comfortable, Inherent Flame Retardant twill. PFAS-free.
Test result fabric
EN ISO 11612 A1 B1 C1 F1
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 5,0 cal/cm², ATPV: 5,8 cal/cm²
LOI 26,7%
EN 1149-3
EN ISO 20471 for fluorescent colours

Washing instructions

Certifications

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 E3 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 2

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ELIM: 27,0 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • EN ISO 11611
    CL.2 A1+A2
    EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
  • EN 13034
    type PB[6]
    EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
  • EN ISO 20471
    CL.1
    EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
  • EN ISO 15797
    50 WASHES
    EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.

NEW!