PFAS-free and Inherent Flame Retardant Hi-Vis bib ´n´ brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib ´n´ brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
Adjustable braces with hidden plastic buckles and elastic in back. Front zip. Chest pockets, one with flap. Concealed knife buttons. Inside pocket. Adjustable width and loops in waist. Side pockets. Cargo pocket with flap, mobile phone pocket, pencil loop and concealed D-ring. Ruler pocket with flap and reinforced bottom. Kneepad pockets with two different placement levels. Hip pockets with flap. Contrast stitching. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time.
Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (885+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm² LOI 29,0% EN 1149-3 EN 13034 (only for acid and alcaline) EN ISO 20471 for fluorescent yellow
Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (884+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 12 cal/cm², ATPV: 18 cal/cm² LOI 29,5% EN 1149-3 EN 13034 (only for acid and alcaline) EN ISO 20471 for fluorescent yellow
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C1 E3 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 1
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 11611 CL.2 A1+A2EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
EN 13034 type PB[6]EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471 CL.1EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
EN ISO 15797 50 WASHESEN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.
