Flame Retardant Bib ´n´ Brace

SKU
604081
- Tera TX
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 E1 F1
  • EN 61482-2
    APC 1
    ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
  • EN 1149-5
  • *EN ISO 11611
    CL.1 A1+A2
  • EN 13034
    type PB[6]
  • EN ISO 15797
    50 WASHES
  • TRANEMO SKINSAFE

Non-Metal and Inherent Flame Retardant bib ´n´ brace in a light fabric with a comfortable feel and good tear resistance.

Adjustable braces with hidden fixed lock closing and elastic on the back. Chest pocket with flap and D-ring. Inside pocket. Side pockets. Back pockets with pocket flaps. Cargo pocket with flap, mobile phone pocket and tool strap. Ruler pocket. Shaped knees with adjustable inside kneepad pockets. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time. *If the garment is mainly intended for welding processes, please ask Tranemo for usage advice.

Size
30"- 50"R, 32"- 40"T, 34"- 48"S

Product information

Quality

811: Tera TX - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 260 g/m²
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11611 classe 1
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm²
NFPA 70E, ASTM F1506
LOI 29.8%
EN 1149-3
EN 13034
EN ISO 20471 for fluorescent colours

Washing instructions

Certifications

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 E1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 1

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • *EN ISO 11611
    CL.1 A1+A2
    EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
  • EN 13034
    type PB[6]
    EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
  • EN ISO 15797
    50 WASHES
    EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
  • TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.