Non-Metal and Inherent Flame Retardant Hi-Vis bodywarmer with vertical chest pockets and fibrefur lining.
Hidden zip and stud fastener in front. Vertical chest pockets with zip. Vertical side pockets with fleece lining. Two inside pockets, one for documents/Ipad. Draw cord at the bottom of the jacket. Zip access for back heat seal badges. Buttons for attaching hood 9065 81. Fleece on the inside of the collar. Special order – please allow an additional 5 days approximately.
*To meet the requirements of the standard, the waistcoat must be worn together with a long sleeved garment with the same certification.
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 classe 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent co
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
*EN ISO 11612 A1+A2 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
*IEC 61482-2 APC 1
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN ISO 20471 CL.2EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
