Flame Retardant Craftsman Trousers, Windbreaker

SKU
585381
- Tera TX, Outerwear FR
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 F1
  • EN 61482-2
    APC 2
    ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
  • EN 1149-5
  • EN ISO 20471
    CL.1
  • *EN 342
    (5853+5801 or 5808)

Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining.

Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Cargo pocket with flap, concealed D-ring and first aid pocket. Ruler pocket and concealed knife button with loop. Shaped knees with adjustable inside kneepad pockets. Contrast stitching. These trousers have a sewn in lining, size will fit smaller. Special order – please allow an additional 5 days approximately. *The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5930 and 5990.

Colour
94 yellow/navy
Size
30"- 50"R, 32"- 40"T, 30"- 48"S

Quality

811: Tera TX - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 260 g/m²
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
804: HTFR Dobby - 39% modacrylic / 28% polyamide / 17% cotton / 15% aramid / 1% antistatic, 295 g/m²
Inherent Flame Retardant reinforcement fabric.
Test result fabric
898: Cantex Jersey IR - 54% modacrylic / 44% cotton / 2% antistatic, PU-laminated, 210 g/m²
Functional and light lining in Inherent Flame Retardant fabric. Wind and water repellent laminate. PFAS-free.
Test result fabric

Washing instructions

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 2

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • EN ISO 20471
    CL.1
    EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
  • *EN 342
    (5853+5801 or 5808)
    EN 342 - The standard specifies clothing that protects against cold.