PFAS-free and Inherent Flame Retardant Hi-Vis jacket with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
Concealed front zip and press studs. Extended back. Two loops for communication equipment. Right chest pocket with flap, tool strap and concealed D-ring. Left chest pocket with flap. Vertical pocket with zip on left chest. Side pockets with flap. Adjustable cuffs with press studs. Two inside pockets. Contrast stitching.
Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (885+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm² LOI 29,0% EN 1149-3 EN 13034 (only for acid and alcaline) E
Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (884+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 12 cal/cm², ATPV: 18 cal/cm² LOI 29,5% EN 1149-3 EN 13034 (only for acid and alcaline)
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C1 E3 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 1
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 11611 CL.2 A1+A2EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
EN 13034 type PB[6]EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471 CL.3EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
EN ISO 15797 50 WASHESEN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.
