Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets with a wide fit and a windproof jersey lining.
Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Right cargo pocket with flap, ruler pocket, separate mobile phone pocket, pencil holder and concealed knife button with loop. Left cargo pocket with flap and concealed D-ring, ruler pocket, first aid pocket and concealed knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby. Back hem in HTFR Dobby. Adjustable foot width with press studs. Contrast stitching. These trousers have a sewn in lining, size will fit smaller. Special order – please allow an additional 5 days approximately.
*The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5930 and 5990.
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 classe 1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 1149-3
898: Cantex Jersey IR - 54% modacrylic / 44% cotton / 2% antistatic, PU-laminated, 210 g/m²
Functional and light lining in Inherent Flame Retardant fabric. Wind and water repellent laminate. PFAS-free.
Test result fabric
EN ISO 14116 Index 3 EN 61482-1-2:2014 APC 2 (811+898) EN IEC 61482-1-1:2019, ELIM: 19 cal/cm², ATPV: 21 cal/cm² (811+898) EN 1149-3 Waterproof 10000 mm
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 20471 CL.2EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
*EN 342 (5867+5802 or 5806)EN 342 - The standard specifies clothing that protects against cold.
