Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort.
The jacket is ergonomically shaped for working with raised arms. Heat sealed reflective stripes for greater comfort. Concealed front zip and and double storm flap with press studs. Extended back with two side slits for enhanced movement. Two loops for communication equipment. Chest pockets with zip. Side pockets with zip. Left sleeve pocket with flap, hidden D-ring and strap for ID-pocket. Inside knitted cuffs in sleeves. HTFR Dobby at the bottom of the jacket and on the sleeves.
*The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib´n´brace certified according to EN ISO 20471 CL.1 or CL.2.
Inherent Flame Retardant softshell. Wind and water repellent. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1 B1 C2 F2 EN ISO 11611 klass 2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 12.0 cal/cm², ATPV: 19.0 cal/cm² LOI 29,5% EN 1149-3 EN 13034 EN ISO 20471 RIS-3279-TOM fluorescent orange certified for UK railways Waterproof 10 000 mm
Inherent Flame Retardant softshell. Wind and water repellent. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1 B1 C1 F1 EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 23.0 cal/cm², EBT: 28.0 cal/cm² LOI 29.5% EN 1149-3 EN 13034 EN ISO 20471 yellow Waterproof 10 000 mm Breathability 22.0 Pa m²/W
EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 1149-3
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 11611 CL.2 A1EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
EN 13034 type PB[6]EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471 CL.3 CL.2* (S-M)EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.
