Non-Metal and Inherent Flame Retardant softshell jacket that reaches PPE category 4 (higher than 40 cal/cm²).
The jacket is ergonomically shaped for working with raised arms and is made from a soft, wind and water resistant softshell fabric. Concealed front zip and double storm flap with press studs. Two loops for communication equipment. Chest pockets with zip. Side pockets with zip. Inside knitted cuffs in sleeves. Drawcord at the bottom of the jacket. Heat sealed reflective stripes for greater comfort.
*The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib´n´brace certified according to EN ISO 20471 CL.1 or CL.2.
Inherent Flame Retardant softshell with very high protection against Electric Arc. Wind and water repellent. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1 B2 C2 F2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 40 cal/cm², EBT: 44 cal/cm² LOI 29,5% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours Waterproof 10 000 mm Breathability 26,8 Pa m²/W
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1 B2 C2 F2EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
IEC 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN 13034 type PB[6]EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471 CL.3 CL.2* (XS-S)EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
