Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat with increased visibility.
Heat sealed reflective stripes for greater comfort. Concealed front zip and double storm flap with press studs. Two loops for communication equipment. Left chest pocket with flap. Right chest pocket with zip and hole for microphone. Side pockets with zip. Drawcord at the bottom.
*To meet the requirements of the standard, the waistcoat must be worn together with a long sleeved garment with the same certification.
Inherent Flame Retardant softshell. Wind and water repellent. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1 B1 C1 F1 EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 2 EN 61482-1-2:2014 APC 2 EN IEC 61482-1-1:2019, ELIM: 23.0 cal/cm², EBT: 28.0 cal/cm² LOI 29.5% EN 1149-3 EN 13034 EN ISO 20471 yellow Waterproof 10 000 mm Breathability 22.0 Pa m²/W
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
*EN ISO 11612 A1 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
*IEC 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
