Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining.
Tool holder belt loops in waist. Side pockets. HTFR Dobby reinforced tool pockets with tool strips. Hip pockets with flaps. Left cargo pocket with flap and mobile phone pocket. Right cargo pocket with tool pockets and ruler pocket. HTFR Dobby reinforced and shaped knees with adjustable inside kneepad pockets. Back hem in HTFR Dobby. These trousers have a sewn in lining, size will fit smaller. Special order – please allow an additional 5 days approximately.
*The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5930 and 5990.
**Only applies to sizes certified to EN ISO 20471 class 2.
Inherent Flame Retardant fabric in fluorescent colour. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 8,0 cal/cm², ATPV: 8,6 cal/cm² LOI 30.1% EN 1149-3 EN 13034 EN ISO 20471 RIS-3279-TOM fluorescent orange certified for UK railways
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 classe 1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
898: Cantex Jersey IR - 54% modacrylic / 44% cotton / 2% antistatic, PU-laminated, 210 g/m²
Functional and light lining in Inherent Flame Retardant fabric. Wind and water repellent laminate. PFAS-free.
Test result fabric
EN ISO 14116 Index 3 EN 61482-1-2:2014 APC 2 (811+898) EN IEC 61482-1-1:2019, ELIM: 19 cal/cm², ATPV: 21 cal/cm² (811+898) EN 1149-3 Waterproof 10000 mm
EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 1149-3
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 20471 CL.2 CL.1 (30"R 28"S-30"S)EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
*EN 342 (5253+5205 or 5208)EN 342 - The standard specifies clothing that protects against cold.
**RIS-3279-TOMRIS-3279-TOM - The standard specifies high visibility clothing for the Railway Group in the UK.
