PFAS-free¹, Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres.
Hidden zip and stud fastener in front. Two loops for communication equipment. Vertical chest pocket with zip at the right side. D-ring. Side pockets with fleece lining and pocket flaps. Extended back with two side slits for enhanced movement. Adjustable cuffs. Wind stoppers in sleeves. Inside pockets, one for tablet/documents. Fleece on the inside of the collar. Zip access for back heat seal badges. Can be supplied with hood 9151 93.
*The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib´n´brace certified according to EN ISO 20471 CL.1 or CL.2.
**The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5920/5940 and 5980.
¹This garment is produced with new PFAS-free fabrics. For a period, we will have a mixed stock and the transition to PFAS-free will be a running replacement.
Inherent Flame Retardant twill with PU laminate and 50% recycled fibre. Wind and waterproof. PFAS-free. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 8,6 cal/cm², ATPV: 10 cal/cm² EN 13034 EN 1149-3 EN ISO 20471 yellow EN 343 class 4:3 Waterproof 10 000 mm Breathability 18,7 Pa m²/W
Inherent Flame Retardant fabric with Flame Retardant polyester wadding. PFAS-free.
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C2 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 11611 CL.1 A1+A2EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
EN 13034 type PB[6]EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
EN ISO 20471 CL.3 CL.2* (XXS-XS)EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
EN 343 4.1EN 343 - The standard specifies protective clothing used for working in foul weather, for example in rain, snow or fog.
**EN 342 (5101+5122)EN 342 - The standard specifies clothing that protects against cold.
