Non-Metal and Inherent Flame Retardant Hi-Vis Winter Bodywarmer with fiberfur lining. The waistcoat is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. PFAS-free.
Hidden zip and stud fastener in front. Fleece on the inside of the collar. Two loops for communication equipment. Vertical chest pockets with zip. Vertical side pockets with fleece lining. Large inside pocket with zip for Ipad/documents. Draw cord at the bottom of the jacket. Zip access for back heat seal badges. Concealed buttons for attaching hood 9065 81.
*To meet the requirements of the standard, the waistcoat must be worn together with a long sleeved garment with the same certification.
**The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib´n´brace certified according to EN ISO 20471 CL.1 or CL.2.
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 classe 1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
Shirt quality in comfortable, Inherent Flame Retardant twill. PFAS-free.
Test result fabric
EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 EN IEC 61482-1-1:2019, ELIM: 5,0 cal/cm², ATPV: 5,8 cal/cm² LOI 26,7% EN 1149-3 EN ISO 20471 for fluorescent colours
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
*EN ISO 11612 A1+A2 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
*EN 61482-2 APC 2
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
**EN ISO 20471 CL.2 CL.1 (XS-L)EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
