Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets in a light fabric with a comfortable feel and good tear resistance.
Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Cargo pocket with flap, concealed D-ring and mobile phone pocket. Ruler pocket and concealed knife button with loop. Shaped knees with adjustable inside kneepad pockets. Special order – please allow an additional 5 days approximately. Contrast stitching.
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 classe 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 1149-3
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
EN 61482-2 APC 1
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 20471 CL.1EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
EN ISO 15797 50 WASHESEN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.
