Welding Jacket

SKU
553086
- Outback HW
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 F1
  • EN 61482-2
    APC 2
  • EN 1149-5
  • EN ISO 11611
    CL.2 A1+A2
  • EN ISO 15797
    50 WASHES

PFAS-free welding jacket for heavy welding with a long lifetime and very high protection against radiant heat and metal splashes. The soft fabric with extremely good welding properties and the ventilation in the back makes the jacket extra comfortable to use when welding.

Ergonomically shaped and pre-shaped sleeves to avoid creasing from metal splashes. Arm ventilation. Concealed zip and press stud closing. High collar for extra protection and adjustable width. Two loops for communication equipment. Chest pockets with flaps. Side pockets with flaps. Strap for ID-pocket on sleeve. Extended back with reflective stripe and ventilation. Adjustable waist. Inside pocket. Fluorescent fabric on chest and back.

Size
XS-4XL

Product information

Quality

863: Outback HW - 74% viscose / 15% aramid / 10% polyamide / 1% antistatic, 425 g/m²
Inherent Flame Retardant fabric suitable for welding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 B2 C2 (863+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 2
IEC 61482-1-1:2019, ELIM: 16 cal/cm², ATPV: 18 cal/cm²
LOI 28.9%
EN 1149-3
EN 13034 (only for acid and alkaline)
885: Cantex Weld - 50% modacrylic / 36% cotton / 12% polyamide / 2% antistatic, 365 g/m²
Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (885+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm²
LOI 29,0%
EN 1149-3
EN 13034 (only for acid and alcaline)
EN ISO 20471 for fluorescent yellow

Washing instructions

Certifications

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 2

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • EN ISO 11611
    CL.2 A1+A2
    EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
  • EN ISO 15797
    50 WASHES
    EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.